Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9452191
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Supply stainless steel electrolytic polishing |
Published: | 2013-04-18 |
Validity: | 10000 |
Specifications: | PS-P01 |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | Stainless steel electrolytic polishing Product Code: PS-P01-source Chemical official website: www.dgsyhg.com. Suitable material: suitable for all stainless steel and stainless iron polished stainless steel, versatility (can be thrown mirror effect). II. Advantages: 1, This product has been certified by SGS, excluding chromic acid, in line with environmental requirements. 2 bath 24 hours of continuous work is guaranteed for one year. 3, low cost, half the power consumption than ordinary electrolytic polishing liquid Province. 4, no bad smell. III. Operational processes soaked in degreasing → washing → electrolytic polishing → soak the wash → Tuomo → soak soak wash wash → → → pure water → drying Description of the packaging process: 1. Cleaning degreasing and bleaching water. 2. Electrolytic polishing liquid is heated to 55-75 degrees (available quartz rods or titanium heater heating), stop heating to achieve the required temperature. Will be linked to a fixed anode rod. Open the power rectifier switch, the voltage is adjusted to 5-12 volts, and the polishing time of 30 seconds to 10 minutes (the fastest 9 seconds i.e. the security thrown mirror effect). 3. Stripping, optional step. 4 and the workpiece complex case of blind holes, and the gongs pattern with a 3% sodium hydroxide solution, the time was 3 minutes. 5 over water, the time of 3 minutes, an optional step, drying, packaging. IV. Note 1. The lower groove of the workpiece can not have water stains, otherwise it would produce pitting on the workpiece. 2. Polishing liquid is not in contact with skin. 3 operating personnel in the operation need to wear good labor protection appliances must avoid liquid contact with the skin. Waste emissions need to add caustic soda to neutral (pH value of 7) emissions. (5) This product is non-flammable non-explosive, but should avoid direct sunlight, seal the lid when not in use and stored below 45 degrees Celsius. V. Electrolytic polishing equipment required: power, rectifiers, polishing groove, the workpiece hanging with heating facilities, the anode and cathode materials, rinse with plastic box, the electrolyte. VI. Packing: 35kg / barrel, dedicated chemical drum, safe, convenient transportation into. The Company perennial production supply: stainless steel passivation solution, stainless iron passivation solution, stainless steel cleaner, stainless steel electrolytic polishing, stainless steel pickling passivation solution, stainless steel pickling and passivation paste, copper passivation solution, aluminum passivation solution, the copper chemical polishing liquid and the aluminum chemical polishing liquid, neutral degreasing agent, stainless steel spot welding, the oxide cleaning agent, green rust, etc., details can be found: www.dgsenyuanhg.com |
Admin>>>
You are the 6069 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan City Sen Chemical Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 6069 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan City Sen Chemical Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility