Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9452191
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Supply stainless iron passivation solution |
Published: | 2013-04-18 |
Validity: | 10000 |
Specifications: | PV-D03 |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | Dongguan City Sen Source Chemical Co., Ltd. - source the chemical technical documentation technical advice 0769 -22,302,597 Sen source chemical official website: www.dgsyhg.com the the stainless iron passivation solution Product Code: PV-D03. Suitable materials for all of ferritic stainless steel and martensitic stainless steel, and 430 may be more than 100 hours salt spray test, 420,420 J1, 420J2, 420F through more than 72 hours of salt spray testing, 405,434, XM27, 403,410,440,440 C, 443,630,631,632,416, 1Cr17, 410,1 Cr13, 1Cr12, 0Cr13, 2Cr13, 3Cr13, 4Cr13 by more than 48 hours salt spray test. II. Product advantages through more than 48 hours salt spray test, the best up to 480 hours. This product does not contain hazardous materials, SGS test certificate. Does not change the color of the workpiece, does not change the size of the workpiece. Simple to use, warm soak can be cost savings. Independent research and development, process maturity and stability. The operation process degreasing ---- mobile water rinse ---- passivation --- mobile water rinse ---- ligand ---- mobile water rinse ---- pure water - --- drying packaging process: 1. degreasing, if it is satisfied that the surface of the workpiece without any oil, rust, impurities (such as just polished workpiece), this step can be omitted. 2 passivation time of 30 minutes, you need to passivation solution heated to 75-80 degrees, must pass through the process. (3) coordination, time of 15 minutes complexing agent, you need to be heated to 60 degrees, to go through the process. Over water, 3 minutes to go through the process. Notes: 1. Workpiece before entering the passivation solution must be clean, the workpiece before passivation has rust or December of must be rust or in addition to wax. Before any one process, must the workpiece rinse, the surface should not be on a process of liquid residues. Workpiece before entering the passivation solution to try to dry, in order to avoid the workpiece entrained water to dilute the passivation solution. As far as possible in the process of passivation passivation tank cover, in order to avoid excessive evaporation of the passivation solution, resulting in unnecessary waste. Note 1. Keeping the workplace ventilation, the product on the skin without any irritation. 2 passivation slot can be plastic slot or groove, but can not use cement tanks, and cement causes the passivation solution. 3 operating personnel in the operation need to wear good labor protection appliances, try to avoid liquid contact with the skin. Waste emissions need to add caustic soda to neutral (pH value of 7) emissions. (5) This product is non-flammable non-explosive, but should avoid direct sunlight, seal the lid when not in use and stored below 45 degrees Celsius. Equipment requirements. Heating rods or thermostatic device. 2 plastic box or the stainless steel tank, plastic box need to be able to withstand a temperature of 75 degrees is not deformed, made of PVC hard sheet or stainless steel tank. VI. Storage and packaging: 1. This product is non-combustible, not explosive, long-term storage in a cool place, the maximum temperature does not exceed 45 degrees. 2.25KG / barrel, special chemical drums, safe, and convenient transportation. |
Admin>>>
You are the 6069 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan City Sen Chemical Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 6069 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan City Sen Chemical Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility